User's Manual

nanoLTE AP Pre-Provisioning and Configuration AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 48
7.3.3 Enter AP Identification Details
9) The page for specifying AP identification details will appear:
Notice that the Management Server Address and Security Gateway are set
automatically according to the TR-069 object selected for invoking the wizard. The
Management Server Address may not be changed.
10) Click in the Site ID box and type a numeric ID. This must be unique. As the ID
number is entered, the Site Name is set automatically.
Note: Do not use the AP’s serial number for the Site ID. An AP can be physically
replaced at a site, in which case the site configuration will stay the same,
but the AP’s serial number will be updated.
11) If required, click in the Site Name box and type any text to replace the default Site
Name. Enter text that will help identify this site.
12) Click in the LTE AP Equipment Identity box and enter the serial number for the
AP. This must be an exact match for the AP’s serial number. If this does not match,
the NOS Server will not allow the AP to connect.
13) If Security Gateway 1 is not correct for this AP, click the drop-down list and choose
a different Security Gateway from the available ACME SecGWs defined under
Root > Southbound SNMP Interfaces and/or the generic gateways defined under
Root > NOS > Security Gateways.
14) Optionally specify Security Gateway 2 and/or Security Gateway 3.
15) If the MME has not been filled from a template or it is not correct for this AP, click
the MME Select button, choose one or more MMEs from the Edit Target Objects
List dialogue, then click OK.
Note: Multiple MMEs can be selected by checking the MME Pools object , any
combination of MME Pool objects or any selection of individual MME
objects.