User's Manual

nanoLTE AP Pre-Provisioning and Configuration System Preparation for nanoLTE AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 40
5.9 Create AP Groups
This is optional.
Create AP Groups if the groups must be used for one or both of the following purposes:
• AP management by Group - if this is enabled, it is recommended to associate an
AP Info object template with each Product Class (see [INST_43380]) to ensure all
APs will be pre-provisioned with a Group
• Group identity in uploaded PM file names
5.9.1 Create a Group
1) In the NOS Client, select the Root > Network Orchestration System > Groups
object. Any existing Group objects are shown in the Workspace pane, or expand
the Groups object to list them in the Explorer pane.
2) Right-click the Groups object and select Create > Create Group.
3) Enter a Group ID of up to 16 characters.
Spaces are not allowed so it is recommended to use underscore (_) characters
instead of spaces. This is enforced to avoid spaces in the file names of PM files
uploaded by APs.
4) Repeat as needed according to the Group IDs required by the network policy.
5.10 Neighbour Cell Objects
Optionally create Neighbour Cell Objects now, so that they are ready to assign to APs as
neighbours via the Neighbour Cell Wizard. This can be done if an AP’s planned location is
known.
See [OPM_43005] for full information on creating neighbour cell objects.