User's Manual
Table Of Contents
- nanoLTE AP Pre-Provisioning and Configuration
- Table of Contents
- 1 Introduction
- 2 Pre-Provisioning Overview
- 3 Capturing Network Policies and AP Modes
- 4 AP-Unique Parameters
- 5 System Preparation for nanoLTE AP Provisioning
- 6 Template Preparation
- 7 AP Provisioning
- 8 How to Implement Policies
- 9 Installation Checks
nanoLTE AP Pre-Provisioning and Configuration System Preparation for nanoLTE AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 38
3) Click the Select button for Default Associated TR-069 AP Service.
4) In the Select the linked object box, drill down to the TR-069 AP Service and select
it:
5) Click OK and the Value for Default Associated TR-069 AP Service will show the
DN (Distinguished Name) of the TR-069 AP Service.
6) Click the Select button for Default Security Gateway.
7) In the Select the linked object box, drill down to the required Security Gateway
and select it:
8) Click OK and the Value for Default Security Gateway will show the DN
(Distinguished Name) of the chosen security gateway.
9) Click Apply to save the changes. Configuration of the LTE APs object is now
complete.