User's Manual
Table Of Contents
- nanoLTE AP Pre-Provisioning and Configuration
- Table of Contents
- 1 Introduction
- 2 Pre-Provisioning Overview
- 3 Capturing Network Policies and AP Modes
- 4 AP-Unique Parameters
- 5 System Preparation for nanoLTE AP Provisioning
- 6 Template Preparation
- 7 AP Provisioning
- 8 How to Implement Policies
- 9 Installation Checks
nanoLTE AP Pre-Provisioning and Configuration System Preparation for nanoLTE AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 34
5.4 Copy AP Software onto the NOS Server
This procedure needs to be executed once for each AP software file that is required for the
APs:
1) Use a graphical SCP client (such as WinSCP) to log in as user oamnorth on the
NOS server hosting the Software Download Service.
Alternatively, login directly to the NOS as oamnorth and use the scp command to
pull the file into the directory.
2) Copy the required AP software files into this directory:
/var/lib/ipaccess/data/oamfiles/download/sw/install
The software files are named as follows:
AP Software with Code Signing: Variants and Filenames
Where <ver> is the version, such as "123.0_signed".
Note: See the corresponding release note for the relevant software version and
file names.
3) Wait five minutes for the .sdp files to be validated and copied to:
/var/lib/ipaccess/data/oamfs-web/download/sw
The .sdp files are now available for download to nanoLTE APs.
AP AP Product and S/W
Variant
Software Filename
nanoLTE E40 AP (278 variant) 279K 279K007_<ver>.sdp