User's Manual

nanoLTE AP Pre-Provisioning and Configuration System Preparation for nanoLTE AP Provisioning
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 33
The file name contains the following information:
AP Software Version in the NOS Client
In the NOS Client, select an AP object then select Device.DeviceInfo. in the Navigation
pane:
This package shows all the available software version information. The parameter of
interest the SoftwareVersion. Here is an example value for a lab test build:
• Kernel: 279_002 123.0, Filesys: 279K004 123.0
The Filesys part of the SoftwareVersion shows version of software that is loaded and
running on the AP. This relates to the overall software version.
Note: The Kernel version can be ignored for the purposes of determining the software version on
the AP.
<SWC> The software code that corresponds to the target hardware platform, which will be
one of:
• 251 for the nanoLTE E40 AP (hardware code 248)
• 279 for the nanoLTE E40 AP with secure boot enabled (hardware code
278)
Note: The hardware code appears on the information label on each nanoLTE AP.
<Var> The software variant, which will be:
• T for lab test builds (251 software only)
• K for secure boot builds (279 software only)
<PKG> This is 007 for all .sdp files, to indicate that an AP software file is a complete AP
software image. That is, it includes the three following items:
• 001 - Boot loader
• 002 - Kernel
• 004 - Filesys
The "007" comes from adding up the numbers of these three items. These are
always delivered as a complete 007 set, but are shown separately in the NOS Client
(see below).
<Version> The software version, such as "123.0_signed".
.sdp The file extension, which is always .sdp.