User's Manual
Table Of Contents
- nanoLTE AP Pre-Provisioning and Configuration
- Table of Contents
- 1 Introduction
- 2 Pre-Provisioning Overview
- 3 Capturing Network Policies and AP Modes
- 4 AP-Unique Parameters
- 5 System Preparation for nanoLTE AP Provisioning
- 6 Template Preparation
- 7 AP Provisioning
- 8 How to Implement Policies
- 9 Installation Checks
nanoLTE AP Pre-Provisioning and Configuration AP-Unique Parameters
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 29
4.3 AP Location
MIB/Data Model Name Description Comment
LTEApInfo->
LTEAPInfoPackage>
provisionedLatitude
Defines the AP's expected Latitude.
The value of this attribute is specified at
site creation time and may only be
updated by a Change Location action.
Required for static
neighbour planning.
LTEApInfo->
LTEAPInfoPackage>
provisionedLongitude
Defines the AP's expected Longitude.
The value of this attribute is specified at
site creation time and may only be
updated by a Change Location action.
Required for static
neighbour planning.
LTEApInfo->
LTEAPInfoPackage>
provisionedRadiusOfUncertai
nty
Defines the radius of uncertainty
associated with the AP's provisioned
location. The value of this attribute is
specified at site creation time and may
only be updated by a Change Location
action.
Required for static
neighbour planning.