User's Manual

nanoLTE AP Pre-Provisioning and Configuration Capturing Network Policies and AP Modes
NANO_INST_43370 v101_0.4 for N4G_1.1 © ip.access Limited 2016 Page 13
3.3.3 FM Northbound - AP Information in SNMP Traps
By default the SNMP Traps sent on the NOS Northbound interface include the Managed
Object Class and Managed Object Instance. The Object Instance is the full Distinguished
Name (DN), which provides a unique identifier for the source.
However, the operator may prefer to use another identifier. In this case the Northbound
SNMP Service on the NOS can be configured to emit additional fields according to the
source object class. So for example, the Site ID and/or Site Name could be added to the
Traps associated with an AP by configuring the “Alarm Watch List” attribute.
3.3.4 Parameters for AP Naming
Use the following attributes in the APs object to automatically configure the
X_000295_JobId parameter for all APs:
For a list of attributes and parameters used for naming and identification of individual APs,
see section 4.1.
MIB/Data Model Name Description Comment
Generate AP Job ID
(generateJobId) (APs object,
jobIdConstructionPackage)
Setting this attribute to TRUE
causes the NOS to generate the
value of an AP's
X_000295_JobId parameter
from the Associated Group and
Provisioned Product Class
attributes of the AP Info object.
See the Associated Group
attribute held in the AP Info
object in the NOS.
Append Equipment ID to Job ID
(appendEquipmentId) (APs
object,
jobIdConstructionPackage)
If set to TRUE, the AP's
[equipmentId] is appended to
the AP [jobId] regardless of the
setting of the [generateJobId]
attribute value.
An automatic method for
ensuring AP-unique PM
filenames.