User's Manual

Table Of Contents
nano3G AP Installation Manual Pre-Provisioning a nano3G AP
N3G_INST_300 v292_1.0 for N3G_2.92 © ip.access Limited 2012 Page 34
Although files can be selected for all sources, only the item for the selected radio
button will be used on moving to the next page of the wizard. The AP type in the
chosen configuration file must be the same type of AP object as has been selected
for the new site.
For information on preparing an configuration file for an AP, see section 4.
Select a Local File
9) Click the radio button for From local file, then click the browse button on the right.
The file browser will appear. Browse to the location of the required configuration
file and select it. For example:
10) Click Open and the file name will be shown in the box for Local file.
Select a File Saved on the NOS Server
11) Click the radio button for From server file, then click the browse button on the
right. A list of configuration files saved on the NOS server will appear. For example:
12) Click the required configuration file in the list, then click Load. The list will close
and the file name will be shown in the box for Server file.