User's Manual

nano3G AP Installation Manual Commission a nano3G AP
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012 Page 44
15) Click the ATAS Download link on the left. The web page for downloading an ATAS
bundle will be shown. This will also show any current ATAS version information, if
applicable.
16) Inspect the current ATAS version information. If the ATAS package is already
correct then it is not necessary to re-download the ATAS package, so skip to
section 5.5.
17) In the text box, enter the URL for the SDP file stored on the commissioning
terminal, which contains the required ATAS bundle. For example:
http://192.168.0.2/webservername/atas_file.sdp
18) Click Begin Download.
19) Wait about a minute.
20) Click Extract Previously Downloaded ATAS.
21) Wait about a minute. If the ATAS version information is not refreshed, use the
appropriate browser command to refresh the web page.
22) Inspect the ATAS version information on the ATAS Download page to verify it is
now correct.