Operating Guide

nano3GAP Operations Manual Common Procedures
© ip.access Ltd Page 3
2 Common Procedures
2.1 Restart a nano3GAP
To restart an AP:
• Power cycle it.
• Invoke a reinitialize action from the OMC-R, see section 2.3.2.
The AP will start up in th
e same administrative state in which it was before the restart.
2.2 Using the OMC-R Client
2.2.1 Start the OMC-R Client
The OMC-R Server provides a web page to start the OMC-R Client.
1) Start a web browser application.
2) Enter the URL for the OMC-R server’s web page as:
http://<server-hostname>/omcr
Where <server-hostname> is the fully qualified hostname of the OMC-R server.
Note: This assumes that DNS is correctly configured on the management
network: the OMC-R server can be found by using its host name from
client computers on the same network.
3) Press the Enter key and the OMC-R web page will be displayed.
4) If it has not been installed on the client computer, click the link to download and
install the Java runtime (JRE version 1.5) for Windows®. This will allow a
Windows® client computer to run the OMC-R Client.