Operating Guide

nano3GAP Operations Manual Troubleshooting the nano3GAP
© ip.access Ltd Page 16
3.4.3 Diagnostics Tuning of the AP
It is possible to modify some AP settings remotely from the OMC-R.
1) Log in to the OMC-R.
2) Find the required AP by its serial number or object name (see section 2.2.2) and
select it
.
3) In the attribute frame, select the Diagnostics Tuning attribute.
4) Edit the following parameters as needed:
File Description
Start-up CLI
commands
CLI commands run automatically once MgrApp has started up.
Allows CLI commands, such as “ma::dbgtask 16 on” to be run
which turns on task 16’s CLI output.
Immediate CLI
commands
CLI commands to be run immediately.
Nv_env.sh Bash
environment variables
Used by the platform and bash based scripts to change the
behaviour of the AP.