Operating Guide

nano3GAP Operations Manual Common Procedures
© ip.access Ltd Page 12
Note: When no offset is applied, the NWL Test Status in the Network Listen
Status Package is set back to NWL Idle. This can happen very quickly
and there may be no visible change to NWL Test Status. If the NWL Test
Status appears to have stayed at NWL Idle for more than one minute, it
can be assumed that nothing has happened and the AP may be
unlocked.
o If the process continues, the frequency correction is applied.
o A new scan takes place to check that the new setting has improved the
frequency offset. If the new offset is worse than the offset just applied, the
frequency correction is reversed. Otherwise, the new value is retained.
o The Estimated Frequency Offset (PPB) value in the Network Listen Status
Package is reset to 0 until the offset is recalculated by another Network
Listen scan. The NWL Test Status in the Network Listen Status Package is
set to NWL Idle.
10) Right-click the AP object again and select Unlock.