Operating Guide

nano3GAP Operations Manual Common Procedures
© ip.access Ltd Page 10
4) Click Start BCCH Detect Test, Start RSSI Scan Test or Start Sequential NWL
Tests.
5) The AP will administratively shut down (wait for calls to complete) and lock, then
the tests will run. The AP will then unlock once the tests are complete.
2.4.2 View Network Listen results
Once the nano3GAP has booted up and performed an RF scan, it is possible to see the
results in the OMC-R Client.
1) Find the required AP by its serial number or object name (see section 2.2.2).
2)
Right-click the AP object and select View Network Listen Results from the
menu.
3) The Network Listen Results viewer will appear (see below).
4) Alternatively, select the Network Listen Results Package in the Navigation pane
and select the following:
o Cell Results
o RSSI Results
o UMTS UL Results
The view has a graphical representation of the Network Listen results on the Chart tab,
and a list of detected cells on the Table tab.