Operating Guide

Table Of Contents

nano3GAP Operations Manual Common Procedures

Delete CRLs The AP will delete its CRLs. The currently open secure connections are

not disconnected. The next time the AP attempts to open a secure

connection, it has to connect to the CRL server to get an up-to-date

CRL.

2.3.3 AP Configuration

The essential configuration steps for commissioning an AP using the OMC-R are

described in [INST_300]. This section provides additional information about configuration

changes tha

t may be of interest.

• Network Listen Control Package

• Cell Package

• NAS Package

• Location Package

2.4 Using Network Listen

Network Listen (NWL) is used by a nano3GAP to scan the local RF environment and

gather information from neighbouring cells. Network Listen can detect WCDMA cells, both

macro and other nano3G and GSM cells. The AP can use the information gathered for the

following:

• Check neighbour cells for handover and reselection

• Automatic clock frequency calibration

2.4.1 Run Network Listen Tests

1) Find the required AP by its serial number or object name (see section 2.2.2).

2) Right-click the AP object and a menu will appear.

3) Move the pointer down to Actions and a sub-menu will appear.