Installation Guide

nano3GAP Installation Manual nano3GAP and PSU Regulatory Information
© ip.access Ltd Page 22
Interference with Electronic Devices
CAUTION
If using a pacemaker, ensure you are using the device in accordance with its
safety requirements with respect to RF devices. Consult your doctor if you have
questions about RF signals and your pacemaker.
CAUTION
If using a hearing aid, RF devices may cause interference.
CAUTION
Unshielded electronic devices should not be used near the nano3GAP-4.
Conversely, the nano3GAP-4 should not be installed adjacent to unshielded
electrical or electronic devices (such as unshielded speakers).
Other Warnings and Cautions
WARNING
Do not install the nano3GAP-4 in a position where the power supply cable or
network cable may cause a tripping or choking hazard.
WARNING
Do not install the nano3GAP-4 or the power supply on an unstable surface. All
caution must be observed to prevent the device from falling and causing injury
to a person and/or damage to the device.
WARNING
The nano3GAP-4 should not be disposed of in household waste bins. Please
follow local regulations for disposal of electronic devices.
CAUTION
Do not install the nano3GAP-4 in a position where the power supply cable or
network cable may be damaged by walking on the cables.
CAUTION
Do not attempt to fit an external antenna or antenna cabling to the nano3GAP-4.
7.2 Regulatory Statements
7.2.1 Type Approval and EMC Standards
• FCC CFR47 Parts 15B, 27
Note: Changes or modifications not expressly approved by the party responsible for compliance
may void the user's authority to operate this equipment.
Model nano3G 219C has FCC ID QGGIPA219C