User's Manual

Proprietary & Confidential Information
iotTech Corporation, Taiwan
Doc. NO:
ITM-FCC3F1 Datasheet
management of other tasks.
Note: The premise for using this method is that the user needs to enable the input function of the APS
serial-port when the main program is initialized, otherwise the input becomes invalid.
At the same time, when the configuration loses power, it needs to be reconfigured when it is powered
on next.
(2) Using log output provided by SDK to configure API management task log API relevant content
configured by log output is as follows:
“tracer_log_level_set_ext” function entry parameters are defined in Table 7.
Table 7: tracer_log_level_set_ext Function Entry Parameter Definition