Users Manual

ITM-1066A User Manual
Proprietary & Confidential Information iotTech Corporation, Taiwan
Doc. NO:
C. You can select the project you want to execute and build up the bin file.
D. Take project ‘mac_atcmd’ as example.
E. Type ‘make setup p=mac_atcmd’
F. Type ‘make’ to build up the bin file
G. The desired bin file is shown as below
H. Using USB firmware upgrade tool to update this bin file into the module.
I. Reboot the module after firmware upgrade, and connect the module through UART port,
then you will see the LOG shown as below
J. Now you can key in AT command to manipulate the module