Iota DLS-45-X Specifications

IOTA Engineering 1361 E. Wieding Rd Tucson, AZ 85706 1-800-866-4682 www.iotaengineering.com
Rev. 041317
Both the DLS-45 and DLS-45-X
utilize a standard NEMA 5-15
cord (approx. 36-inch length) for
connection to a 15A receptacle.
You can also find us on
DC Output Voltage (No Load) approx.
Output Voltage Tolerance (No Load)
Output Amperage, Max Continuous
Output Voltage (Full Load) approx.
Max. Power Output, Continuous (DLS / DLS-X)
Ripple and Noise
Input Voltage Range
Input Voltage Frequency
Maximum AC Current (@108Vac)
Typical Efficiency
Max Inrush Current, Single Cycle
Short Circuit Protection
Overload Protection
Line Regulation
Load Regulation
Fan Control
Thermal Protection
Working Temperature Range
Storage Temperature
Withstand Voltage (VDC)
†
Weight
13.6V (DC)
+ or - .7%
45 Amps
>13.4V (DC)
600W / 650W
<50 mV rms
108 - 132 VAC
47-63
11 Amps
>80%
30 Amps
Ye s
>100%
100 mV rms
<1.5%
PROPORTIONAL
YES
0° - 40° C
-20° to 80° C
1700/1700/500
5.0 lbs
45A DLS
RATINGS AND SPECIFICATIONS
†
Primary to Chassis/Primary to Secondary/Secondary to Chassis
DLS-45-X
DIMENSIONS
Dual-State Charging
ADDITIONAL FEATURES
IOTA’s Dual-State Charging design allows the unit to function as both a constant voltage
or a constant current charger and automatically selects the optimal charging method for
your battery’s needs, resulting in safer, faster, and more efficient charging.
Line / Load Control
The tight line/load control of the DLS allows for clean conversion of AC voltage into
steady and reliable DC power for your battery or load. By preventing erratic DC output,
the DLS Series allows confident operation of onboard and sensitive equipment for opti-
mal life and prevents damage or equipment shutdown from unexpected overloads.
Switch-Mode Technology
The IOTA DLS Series uses state-of-the-art switch mode technology, which minimizes
wasted power by significantly reducing high dissipation states. The switch-mode design
allows for reliable, efficient performance in a compact chassis with lower operating
temperature.
Built-in protection features against low transient AC line voltage, and cur-
rent limit and thermal overload protection.
Proportional Fan Control provides ‘whisper-quiet’ operation, utilizing the
fan only when needed and at minimal speeds, eliminating sudden and
obtrusive start-up noise.
External Reverse Polarity automotive blade-type protect the unit in the
event of incorrect battery hook-up.
UL Listing for United States and Canada.
DLS-45
STATE-OF-THE-ART INDUSTRIAL DESIGN...
6.20 inches
(adaptor plate option)
6.20 inches
6.70 inches
6.20 inches
6.0 inches
9.67 inches
3.40 inches
6.0 inches
10.3 inches
2.7 inches
6.0 inches
4.7 inches
A.C POWER CORD
4-STAGE SMART CHARGING OPTIONS
Optional 4-stage smart-charging is available for both the DLS and DLS-X
Charger Converter. Four-stage smart-charging ensures fast, efficient
charging and protects your battery from the potential of boiling, sulfation and
stratification with Bulk, Absorption, Float, and Equalization stage charging.
For the DLS, use the IQ4. For the DLS-X, use the IQ4-X. Contact Customer
Service or visit www.iotaengineering.com/iq.htm for further information.