Iota DLS-30 Specifications

DC Output Voltage (No Load) approx.
Output Voltage Tolerance (No Load)
Output Amperage, Max Continuous
Output Voltage (Full Load) approx.
Max. Power Output, Continuous
Ripple and Noise
Input Voltage Range
Input Voltage Frequency
Maximum AC Current (@108Vac)
Typical Efficiency
Max Inrush Current, Single Cycle
Short Circuit Protection
Overload Protection
Line Regulation
Load Regulation
Fan Control
Thermal Protection
Working Temperature Range
Storage Temperature
Withstand Voltage (VDC)
†
Weight
13.6V (DC)
+ or - .7%
30 Amps
>13.4V (DC)
400W
<50 mV rms
108 - 132 VAC
47-63
7.3 Amps
>80%
30 Amps
Ye s
>100%
100 mV rms
<1%
PROPORTIONAL
YES
0° - 40° C
-20° to 80° C
1700/1700/500
4.5 lbs
30A DLS
RATINGS AND SPECIFICATIONS
†
Primary to Chassis/Primary to Secondary/Secondary to Chassis
ADDITIONAL FEATURES
Built-in protection features against low transient AC line voltage, and cur-
rent limit and thermal overload protection.
Proportional Fan Control provides ‘whisper-quiet’ operation, utilizing the
fan only when needed and at minimal speeds, eliminating sudden and
obtrusive start-up noise.
External Reverse Polarity automotive blade-type protect the unit in the
event of incorrect battery hook-up.
UL Listing for United States and Canada.
IOTA Engineering 1361 E. Wieding Rd Tucson, AZ 85706 1-800-866-4682 www.iotaengineering.com
Rev. 060817
The DLS-30 utilizes a standard
NEMA 5-15 cord (approx. 36-
inch length) for connection to a
15A receptacle.
You can also find us on
DIMENSIONS
DLS-30
6.20 inches
6.70 inches
6.20 inches
6.0 inches
9.67 inches
3.40 inches
A.C POWER CORD
4-STAGE SMART CHARGING OPTIONS
Optional 4-stage smart-charging is available for both the DLS Charger/Con-
verter. The IQ4 four-stage smart-charging ensures fast, efficient charging
and protects your battery from the potential of boiling, sulfation and stratifica-
tion with Bulk, Absorption, Float, and Equalization stage charging. External
and internal IQ4 options available. Contact Customer Service or visit www.
iotaengineering.com/iq.htm for further information.
The DLS Series Battery Charger/Power Converter is war-
ranted from defects in materials or workmanship for two
years from date of retail purchase, and limits the reme-
dies to repair or replacement. This warranty is valid only
in the continental United States and Canada. For com-
plete warranty details, contact Customer Service or visit
www.iotaengineering.com.