Datasheet

DIY IOT Electronics and Solutions
IOT-BOTS.COM LLC IBT-QTC-BG9X-AMC-DS Rev. 1.1 18
Pic.12. qTop BG95 LTE GNSS AMC Shield Setup (Arduino MKR Zero Board)
Several demos are implemented and published to get qTop Modem Shields up and
running in a minute:
qTop BG95 AMC Arduino MKR Demo: https://www.iot-
bots.com/blogs/news/bg95-arduino-mkr-shield-and-thingsboard-dashboard-new-
option-from-iot-bots-com
qTop BG96 AFC Adafruit Feather ESP32 Demo: https://www.iot-
bots.com/blogs/news/get-your-nice-looking-iot-dashboard-in-a-minute-with-our-
diy-iot-esp32-bg96-bme280-thingsboard-solution
FCC & IC Compliance
If the device antenna is located farther than 20cm from the human body and there
are no co-located transmitters then the Modem FCC/IC approvals can be re-used
by the end product;
If the device antenna is located closer than 20cm from the human body or there
are co-located transmitters, then the additional FCC/IC testing may be required for
the end product (Modem FCC/IC approvals cannot be reused).