User's Manual

WA020100 - Smart Irrigation Controller
UMAOC001 Rev G
USER MANUAL
Page 20 of 33
7.2.2 DOWNLINK 02 – MODE CONTROL AND STATUS FOR VALVES
byte 1
byte 2
byte 3
tf
em
es
tf. Type of downlink frame (02 - mode control and status for electrovalve outputs)
em. Electrovalve control mode. Parameter which contains the flags to program valves in manual
mode or in auto mode according to irrigation schedule (variable type mask). Examples:
0x01 – EV1 manual
0x02 – EV2 manual
0x04 – EV3 manual
0x08 – EV4 manual
0x0F – All manual
0x00 – All Auto
es. Electrovalve status. Parameter which contains the flags to know the status of the valves (variable
type mask). Examples:
0x01 - EV1 ON.
0x02 - EV2 ON.
0x04 - EV3 ON.
0x08 - EV4 ON.
0x0F - All ON
0x00 - All OFF
NOTE
• After receiving the command, it will be applied 3 minutes later and Watersens will perform an
uplink type 00 (device status) to notify the change