User's Manual

WA020100 - Smart Irrigation Controller
UMAOC001 Rev G
USER MANUAL
Page 17 of 33
7.1.4 UPLINK 05 - LoRaWAN NETWORK STATUS
After receiving from server the command requesting the network status seen from the device side, Watersens
will perform in 3 minutes an uplink with this info. The format of the payload is described below
byte 1
byte 2
byte 3
byte 4
byte 5
tf
ri
sn
dr
tp
tf. Type of uplink frame (05 - network status uplink)
ri. RSSI of the last link received by Watersens in dBm data (data type 8 bits signed)
sn. SNR of the last link received in dB data (data type 8 bits signed)
dr. Data rate adjusted in Watersens (for more detail according to the region visit https://lora-
alliance.org/resource-hub/lorawanr-regional-parameters-v102rb)
tp. Tx Power adjusted in Watersens (for more detail according to the region visit https://lora-
alliance.org/resource-hub/lorawanr-regional-parameters-v102rb)