User Manual

14
Connecting the SoloPRO to Your Computer
Using the USB connection
1. Connect the included power supply to the back of the SoloPRO.
CAUTION!
To avoid damage to the power supply connector, make sure it
is aligned correctly before plugging it into the drive. Do not move the
drive while it is powered up to avoid drive damage or data loss.
a) Plug in the AC cord in the the power supply.
b) Plug the small end of the power supply into the SoloPRO’s power
port.
c) Plug the AC cord into an AC outlet.
2.
Connect the USB Cable.
The USB cable has a flat connection on one end,
and a square connection on the other end. The flat connection plugs into
your computer. The square connection plugs into the SoloPRO. Be sure
to correctly insert the connectors or you may damage the receptical.
3.
Turn on the power switch
on the back of the SoloPRO