Owner's Manual

Chapter 21: Settings
158
• Tone Only: An audible alert tone plays (subject to Silent Mode behavior), and the alert is
added to history.
• Display Only: A persistent alert dialog displays, no alert tone plays, and the alert is added
to history.
• Off: No alert dialog displays, no alert tone plays, and the alert is added to history.
3 Tap OK.
21.25
Network Loss Tone Repeat
The Network Loss Tone Repeat setting determines whether the phone plays the network loss tone
continuously at a periodic interval or plays it once when the PTT application user observes
network loss. When selected, a tone plays when the application transitions from one network to
another.
21.25.1
Changing the Network Loss Tone Repeat Setting
Procedure:
1 From the Settings, scroll to and tap the Network Loss Tone Repeat setting.
2 Select the desired Network Loss Tone Repeat setting option.
If the network loss tone is enabled, you can set a repeat period for the network loss tone.
Supported values are None (no repeat), 10 seconds, 30 seconds, and 60 seconds. The
default option is None.
3 Tap OK.
21.26
Network Up/Down Tones
The Network Up/Down Tones setting allows you to set whether tones are played for network loss, both
network loss and network reconnect, network loss during a call only, or none (default is network loss
during a call only).
21.26.1
Changing the Network Up/Down Tones Setting
Procedure:
1 From the Settings, scroll to and tap the Network Up/Down Tones setting.
2 Select the desired Network Up/Down Tones setting.
3 Perform one of the following actions:
• Network Loss: The phone plays a tone during a network loss.
• Network Loss and Reconnect: The phone plays a tone during a network loss and
reconnect.
• Network Loss during Call Only (default): The phone plays a tone during a call when a
network loss happens.
• None: No tone plays when the network is lost or reconnected.
4 Tap OK.