Owner's Manual

Table Of Contents

Chapter 21: Settings

155

• Off: No alert dialog displays, no alert tone plays, and the alert is added to history.

3 Tap OK.

21.19

Location Change Accuracy

This setting changes the timeliness and accuracy of reporting the location of the device. By default,

the setting option is set to "Approximate”, which provides a less accurate location but has less

impact on battery life. If a more accurate location is needed, select the "GPS" option. This option

reduces battery life more quickly. When you select the GPS option, an informational message

displays to remind you that you may experience decreased battery life.

21.19.1

Changing the Location Change Accuracy Setting

Procedure:

1 From the Settings, scroll to and tap the Location Change Accuracy setting.

2 Select the desired location change accuracy option as follows:

• Approximate (default): Provides less accurate location reporting and drains the battery

less.

• GPS: Location changes are detected using GPS. Use this setting when location changes

should be reported on a more timely and accurate basis.

NOTE: Setting location change accuracy mode to GPS

results in decreased battery life.

3 Tap OK.

21.19.2

Approximate (default)

Provides less accurate location reporting and drains the battery less.

21.19.3

GPS

Location changes are detected using GPS. Use this setting when location changes should be reported

on a more timely and accurate basis.

NOTE: Setting location change accuracy mode to GPS results in decreased battery life.

21.20

Logout

While you are logged out, you appear as “Offline” to others, and you cannot receive PTT calls,

alerts, or secure messages. If you log out before powering off your phone, you remain logged out

after your phone is powered on again. To send or receive PTT calls, you need to log in. See the