Owner's Manual

Chapter 18: Video Streaming (Optional)
140
4 To end the video call transmission, tap the End Call button.
18.4
Making a Video Call to a Quick Group
Procedure:
1 From the Contacts, select your first contact to call.
NOTE: PTT call audio and video audio can be mixed, or PTT call audio can have
priority. For information on PTT audio, see the
Changing the Audio Interaction
Setting on page 150
section.
The Call screen displays.
2 Tap the Add Participants button. The Select Contacts screen displays, as shown below.
3 Select up to 9 contacts to add to the quick group call, then tap the Save button located at
the upper right.
4 Tap the Video icon located at the bottom of the screen. A quick group video call is started.
When the first contact accepts the incoming video call, the video call begins.
Figure 61: Transmitting a Live Video Stream to a Quick Group
NOTE: You can tap the Microphone icon to mute or unmute the microphone audio sent
with the live video stream.
To switch your camera from the rear cam (default) to the front cam, tap the Change Camera
button at the top of the screen.
5 To end the video call transmission, use the End Call button.