Owner's Manual

Chapter 16: Map
116
Figure 42: Create Quick Group from Map
5 After selecting the group members, tap the Save button in the title bar.
The Call screen displays.
6 Press and hold the PTT button.
A Quick Group Call is started, a chirp tone is heard, and the PTT button changes color,
indicating you have taken the floor.
7 Release the PTT button to allow the other members of the group to take the floor and speak.
8 Tap the End Call button to end the call.
16.5.3.1
Adding Members to a Quick Group
Prerequisites: Perform
Creating a Quick Group from the Map on page 114.
Procedure:
1 Tap or touch the Add Members button.
The Add Members screen displays.
2 Select the additional members to add from the Group Members or Contacts.
3 Tap or touch the Save button.
16.5.3.2
Removing Quick Group Members
Procedure:
1 Tap or touch the Quick Group List button.
The Quick Group List displays.