Owner's Manual

Chapter 16: Map
114
16.5.2.4.5
Changing the Notify Member Setting
This setting allows you to set whether a talkgroup member is automatically sent a notification when
entering and leaving the defined boundary when the boundary is active.
Procedure:
1 From the Boundary Settings screen, scroll to the Notify Member settings.
2 Tap the On/Off button to toggle the state of the setting.
3 Continue with the
Changing the Initial Member Notification Setting on page 114 section.
16.5.2.4.6
Changing the Initial Member Notification Setting
This setting allows you to set whether talkgroup members, inside or outside the boundary,
automatically receive an initial notification when a boundary is created.
Prerequisites:
The Notify Member setting must be enabled to use this setting. See the
Changing the Notify
Member Setting on page 114
section.
Procedure:
1 Scroll to and tap the Initial Member Notification settings.
The Initial Member Notification Setting Options displays.
2 Perform one of the following actions:
• Tap Outside Boundary to send the first notification to members outside the boundary.
• Tap Inside Boundary to send the first notification to members inside the boundary.
3 Tap OK.
16.5.3
Creating a Quick Group from the Map
You can create a Quick Group by selecting members from the map. This action allows you to choose
members based on their location. You can also add other members from your contacts.
Procedure:
1 From the Map, tap the Tracked Group Selector button on the action bar.