Owner's Manual

Chapter 16: Map
112
16.5.2.3
Recentering the Map to Your Location
When the boundary is ON (active), you can recenter the map to your location.
Procedure:
• Tap the My Location button located on the lower left side of the map.
The map recenters to your location while the boundary is off and the map recenters to the
boundary center while the boundary is on.
16.5.2.4
Boundary Settings
All Boundary settings are shown in the default state. The Boundary settings can be changed while the
boundary is inactive.
NOTE: Changing the Boundary settings requires you to turn off the boundary. The Boundary
settings can be changed while the boundary is inactive. To turn off the boundary, tap the Set
Boundary toggle to the OFF state.
This section contains the following boundary settings:
•
Changing the Boundary Settings on page 112
•
Changing the Update Interval on page 113
• Changing the Active Boundary Time on page 113
• Changing the Notify Me Settings on page 113
•
Changing the Notify Member Settings on page 114
•
Changing the Initial Member Notification Settings on page 114
16.5.2.4.1
Changing the Boundary Settings
All Boundary settings can be changed in the map boundary settings.
Procedure:
1 From within the Map, tap the Map Boundary Enable button.
The Set Boundary popover displays.
Figure 39: Set Boundary Popover
2 Tap the Settings button.
The Boundary Settings displays.
3 Find the settings you want to change and follow the instructions.