Owner's Manual

Chapter 16: Map
110
-
Changing Boundary Settings on page 112
- Changing the Update Interval on page 113
-
Changing Active Boundary Time on page 113
- Changing the Notify Me Setting on page 113
-
Changing the Notify Member Setting on page 114
- Changing Initial Member Notification Setting on page 114
16.5.2.1
Creating a Boundary
Procedure:
1 From within the Map tab, tap the Tracked Group Selector button.
The list of talkgroups displays.
2 Choose a talkgroup to view talkgroup member locations from the list.
The Set Boundary popover displays.
Figure 36: Set Boundary Popover
3 Tap the Set Boundary button.
The Set Boundary popover displays along with a boundary preview (blue circle).
Figure 37: Boundary Preview
4 Set the boundary size by zooming in/out. You can see the boundary radius in the popover.