Owner's Manual

100
Chapter 15: Talkgroup Scanning
Figure 25: Talkgroup Scanning
NOTE: When Talkgroup Scan is ON, pressing a PTT key accessory ends the current call
if active and allows you to originate a call on the selected talkgroup.
• To turn off Talkgroup Scan, tap the Talkgroup Scan toggle on the menu from the ON state to
the OFF state.
15.2
Adding a Talkgroup to a Scan List
Procedure:
1 Touch and hold on the talkgroup that you want to add to the scan list.
A Context Menu is shown.
2 Tap the Scan List option.
The scan list priority options display.
NOTE: Only corporate groups created by your administrator can be scanned.
3 Tap the priority option you want to assign to the talkgroup or select Normal Priority if you do
not want the talkgroup to be a priority scan talkgroup.
If you choose a priority that is already being used by another talkgroup, a message displays: A
group with priority 1 already exists. Make the group priority 1?
4 Perform one of the following actions:
• Select Yes to assign the existing priority to the current talkgroup.