User Manual

7
2.2. Identification of Parts
Figure 1.CEM40 mount assembly
2.3. CEM40 Mount Basic Cable Connection
Figure 2. Ports on a CEM40 mount
 OFF/ON (O/I): Power Switch
 DC 12V: DC power socket to power the mount (2.1mmX5.5mm, center positive)
 HBX (Hand Box): For connecting to an 8407 Hand Controller
 iPORT: Auxiliary port for connecting to other iOptron accessories, such as a GPS receiver,
an iStarFi WiFi adapter, an electronic focuser or for observatory dome control. DO NOT plug
ST-4 guiding camera cable into this port, It will damage the guide camera electronics.
Az.adj.knob
Lat.lockingscrews
Tripod
DECgearswitch
Polaraxiscover
CWmountinghousing
CWlockingscrew
Counterweight
CWbar
Dovetailsaddle
Azi.lockingscrew