ionmax.com.
HYBRID UV HUMIDIFIER ION90 USER MANUAL Updated: 07-08-2013. Version 2.1.
DEAR CUSTOMER Thank you for purchasing the Ionmax Ion90 Hybrid UV Humidifier. The Ion90 reintroduces moisture into the air to help you maintain a comfortable humidity level in your home. Utilising a combination of UV LED and Bio-photocatalyst technology, the Ion90 sterilises and deodorises the air before allowing it to emit clean, pure mist. Please read this manual carefully to ensure proper usage and save these instructions for future reference.
PRODUCT DESCRIPTION Hybrid UV Humidifier - ION90 2
CONTROL PANEL DESCRIPTION HR TECHNICAL SPECIFICATIONS 3 Humidification Technology Ultrasonic Cool and Warm Mist with Humidistat Control and UV Bio Photo Catalyst Power Consumption Cool Mist - 40W Warm Mist - 125W UV LED Light - 1W Coverage Up to 16m² Tank Capacity 6.5 litres Humidification Rate Cool Mist - 300 ml/hr Warm Mist - 400 ml/hr Continuous Humidification Cool Mist - Minimum 21 hr Warm Mist - Minimum 16 hr Empty Weight 3.
GENERAL INFORMATION What is Humidity? Humidity is the amount of dampness or water vapor in the air. What is Relative Humidity (RH)? The Relative Humidity is the relative ratio of the amount of dampness or water vapor in the air, at a specific temperature, to the maximum amount that the air could hold at the temperature, expressed as a certain percentage.
UV BIO-PHOTOCATALYST STERILIZATION AND DEODORIZATION Relying on the fan outlet to deliver mist, IONMAX Humidifier ION90 uses a combination of UV LED and BioPhotocatalyst to constantly sterilize and deodorize the air before allowing it to blow out clean, pure mist. The combination of bio material and photocatalyst acts as an environmental friendly oxidizing agent when activated by ultraviolet ray. When the photocatalyst captures ultraviolet light, it forms activated oxygen from water or oxygen in the air.
HYDROSTAT FOR PRE-SET HUMIDITY LEVEL The IONMAX Humidifier ION90 comes with an in-built hydrostat that works as an automatic sensor of the surrounding relative humidity and hence facilitates it to continuously moderate and sustain your desired relative humidity. When the pre-set or programmed relative humidity is reached, the humidification process will pause automatically. Alternatively, the humidification process will resume again if the relative humidity drops below the pre-set level.
SLEEP MODE When set to SLEEP, the IONMAX Humidifier ION90 LCD becomes dimmer with the relative humidity set at 60%. It will operate continuously for 8 hours with WARM on before powering off automatically. WATER SHORTAGE INDICATOR The IONMAX Humidifier ION90 comes with an inbuilt water shortage sensor that will inform you when the water level is low. The unit will beep 5 times and the will blink continuously to alert you of the status. This is useful in reminding the user to refill the Water Tank.
Step 5: Select a stable surface to situate the unit. Plug the power cord into the power supply and switch on. A beep signal will be heard. Press the “POWER” button and the unit will commence operation in mode. Read more on the “FEATURES” section to understand the various functions of IONMAX Humidifier ION90. To power off, press the “POWER” button again. Please note that the unit might stop from time to time if: 1) The programmed relative humidity is met. 2) There is a shortage of water supply.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE WHAT TO DO? Humidifier does not operate • Power cable not plugged in. • Humidifier not switched on. • There is a water shortage. (No Water indicator lit up) • Plug in power cable. • Push the POWER Button. • Refill the Water Tank. No Mist Output • Desired pre-set humidity level has been met. • There is a water shortage.
Refrain from overloading your power supply with multiple power plugs. DO NOT pour water into the Fan Outlet of the unit. DO NOT scratch or rub the surface of the Nebulizer with a sharp article. Use the brush provided instead. DO NOT move or incline the humidifier during operation. DO NOT pour water directly into the Mist Outlet. Fill water only through the Water Tank. DO NOT handle the humidifier or power cord with wet hands. DO NOT immerse the humidifier base into water.
! SAFETY INSTRUCTIONS 1) Read the operating instructions carefully before using the humidifier and keep them for later reference. 2) Persons who are not familiar with the operating instructions, as well as children and persons under the influence of medication, alcohol or drugs are not advised to operate the humidifier, or are only advised to operate it under supervision. 3) Only operate the humidifier when it is completely assembled.
Water Overflow The ION90 humidifier water feed system relies on gravity and vacuum in the reservoir (tank) to control water flow to the unit. When the tank is installed on the base, a certain amount of water will be drawn from the tank to create a vacuum. If water is already present in the base, overflowing may occur which can cause the unit to appear to be leaking. To ensure no overflow occurs, please follow the steps below when operating your device: 1. Empty the base of all water during each refill. 2.
WARRANTY DETAILS Congratulations on your purchase! It is our aim to provide you with quality products that you can trust. Our products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or a refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
14
