Quick Start Guide
4 
CONNECTION DIAGRAM 
Setup Scenario 1 
Setup Scenario 2 
Setup Scenario 3 
PARTS DESCRIPTION 
1.  Aux/Linking Connector: This 3.5mm jack can be used to 
connect a CD player, MP3 player, or other audio source using a 
3.5mm TRS cable*. This can also be used to link two Planter 
Speakers together using a 3.5mm TRS cable. 
Note: Since this connector functions as an output when Planter 
Speaker is connected to a Bluetooth device, you can connect 
headphones to it and the internal speaker will still output sound. 
2.  Connecting LED: Indicates when a device is connected to 
Planter Speaker. 
3.  Aux LED: Indicates when Planter Speaker is playing audio from 
a device connected to the Aux/Linking Connector. 
4.  Connecting Button:  Press the Connecting button for 5 
seconds to begin Bluetooth Connecting. The Connecting LED 
will blink blue when searching for Bluetooth devices to connect 
to. The Connecting LED will be lit solid blue when a device is 
connected to Planter Speaker. Press the Connecting button to 
disconnect a connected Bluetooth device.  
5.  Vol +/-: Adjusts the speaker’s volume.  
6.  Power LED: Indicates whether Planter Speaker is powered on 
or off. 
7.  Battery LED: Indicates whether the battery needs to be 
charged or is charging. This LED will turn off once charging is 
complete. 
8.  Charging Adapter Input*: Insert the included charging 
adapter here to charge Planter Speaker’s battery.   
9.  Speaker: This full-range speaker will play audio from a 
connected Bluetooth device or a source connected to the 
Aux/Linking Connector. 
Connect an MP3 Player to Planter Speaker. 
Connect two Planter Speakers together to extend the output fo
r
more spacious sound. 
Planter Speaker LED activity: 
Solid Red Power LED = Power is on. 
Solid Blue Connecting LED = Connected to 
a Bluetooth device. 
Solid Green Battery LED = Battery is 
charging. 
Solid Amber Aux LED = When Aux is set as 
an input. 
Blinking Blue Connecting LED = Searches 
for Bluetooth devices to connect to. 
Blinking Green Battery LED = Battery needs 
to be charged.  
Connect a Bluetooth device with Planter Speaker. 
9
2
3
4
5
6
8
1
7
*For details on how to purchase a 3.5mm TRS cable, visit www.ionaudio.com/products/details/planterspeaker  
*Note:  If the battery is low when using a 
charging adapter, Planter Speaker is not 
guaranteed to provide power for use while 
charging is occurring.   










