ION™ Operating Instructions Designed by Milo Sensors in California Assembled in China Model: A1
ION™ Instruction Manual v1.
5. Click the green text that corresponds to the label on the ION™ wristband (the last four characters of the Bluetooth identifier shown in green are labeled on each wristband). TABLE OF CONTENTS INTRODUCTION WHAT’S INCLUDED GETTING STARTED PAIRING WRISTBAND DISPOSABLE CARTRIDGE ASSEMBLY & EXCHANGE WRISTBAND EXCHANGE STORAGE & USE 6. Click “Pair” (Note: this page will not be displayed if the wristband has previously been paired to the smartphone).
INTRODUCTION GETTING STARTED PAIRING WRISTBAND ION™ provides an option of self or supervised monitoring to allow awareness of one’s alcohol consumption to improve or maintain drinking habits (or to help individuals live well by not drinking alcohol). ION™ provides drink detection monitoring via a wristband wearable combined with intelligent software. WHAT’S INCLUDED ION™ wristband (x2) ION™ charger 1 1.
3. The ION™ wristband LED will rapidly blink turquoise for 5 seconds to indicate connection to a power source. After these 5 seconds, the LED will indicate the battery status of the wristband. Bluetooth Network Wristband battery Not currently active Not currently active Blinking turquoise: Connected to power Solid purple: Very low; charging Solid red: Charging Solid blue (or green): Fully charged WARNINGS DISPOSABLE CARTRIDGE ● The ION™ wristband contains a rechargeable lithium ion battery.
2. End the ION™ Participant app v1.0 on the iPhone by doubleclicking the home button and swiping the app up. 3. Remove a fully charged ION™ wristband from the charger. 5 4 2. Remove the white protective paper from the bioadhesive. Discard. 4. Attach the previously worn ION™ wristband to the charger. Ensure that this wristband LED flashes turquoise for 5 seconds, and then the LED turns red (indicating charging). 5. Follow Steps 2 - 7 in the Pairing Wristband instructions. 6.
2. Connect the ION™ charger to an ION™ wristband. 11 6 CONTACT US Your product feedback is very important to us, and it helps us continue to improve our products and service. Milo Sensors Customer Support contact@milosensor.com https://www.milosensor.com/ ● Keep ION™ wristband and disposable cartridges away from liquids. They are not waterproof/ water resistant. ● The ION™ wristband is designed to be used in a temperature range of 50-86 ˚F (10-30˚ C).
DISCLAIMER TROUBLESHOOTING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any Problem Solution When I click the Bluetooth Icon to pair to the ION™ wristband, there is no device available to connect to? 1. Make sure that the wristband is fully charged. 2. Make sure that the wristband LED is flashing blue once every 5 seconds (indicating it is in pairing mode).
