User Manual

RoboClaw Series
Brushed DC Motor Controllers
RoboClaw Series User Manual
26
Firmware Updates
Ion Studio Setup
Download and install the Ion Studio application. Win7 or newer is required. When opening Ion
Studio it will check for a newer version of it's self. It will then search for the USB RoboClaw
Windows Driver to verify installation. If the USB driver is not found Ion Studio will install it.
1. Open the Ion Studio application.
2. Apply a reliable power source such as a fully charge battery to power RoboClaw.
3. Connect the powered RoboClaw to a USB port on your computer with Ion Studio already open.
Firmware Update
Once Ion Studio detects RoboClaw it will display the current rmware version in the Firmware
Version eld (1). Each time Ion Studio is started it will check for a new version of its self which
will always include new rmware. If an update is required Ion Studio will download the latest
version and display it in the rmware available eld (2).
1
2
3