User Manual
MCP Series
Brushed DC Motor Controllers
MCP Series User Manual
183
WRITE
Syntax
write address, data
• Address - address of EEPROM to store data
• Data - is a byte value that will be written to the address specied. It can be an expression,
constant or variable.
Description
All modules except the BasicATOM Pro 24 come with built in EEPROM. The READ / WRITE
commands were created to access the built-in memory. WRITE will write a signal byte to the
built-in EEPROM at the address specied in the command.
Example
The example program will write the string “Hello” starting at the rst location to the built-in
memory. Next, it will read built-in memory locations 0 through 10 and print the contents to the
terminal window.
index var byte
char var byte
write 0,”H”
write 1,”e”
write 2,”l”
write 3,”l”
write 4,”o”
for index = 0 to 10
read index,char
puts 0,[char]
next
end