User Manual

MCP Series
Brushed DC Motor Controllers
MCP Series User Manual
54
1.9.9 DOUTx
The DOUTx pins are sinking only. They can be used to drive loads such as contactors or braking sys-
tems. Congure the MCP digital output pins.
Mode
Sets the action that will trigger the output pin. MCL scripts can override the set action
Motor1 On - Turns the selected DOUTx pin on when motor channel 1 turns on.
Motor2 On - Turns the selected DOUTx pin on when motor channel 2 turns on.
Motors On - Turns the selected DOUTx pin on when either motor channel turns on.
Motor 1 Reverse - Turns the selected DOUTx pin on when motor channel 1 reverses
direction.
Motor 1 Reverse - Turns the selected DOUTx pin on when motor channel 1 reverses
direction.
Motors Reverse - Turns the selected DOUTx pin on when either motor channel reverses
direction.
Over Voltage - Turns the selected DOUTx pin on when the motor controller has an over
voltage condition.