User Manual

RoboClaw Series
Brushed DC Motor Controllers
RoboClaw Series User Manual
26
BASICMICRO
Firmware Updates
Ion Studio Setup
Download and install the Ion Studio application. Win7 or newer is required. When opening Ion
Studio, it will check for updates and search for a USB Windows Driver to verify installation. If the
USB driver is not found, Ion Studio will install it.
1. Open the Ion Studio application.
2. Apply a reliable power source such as a fully charge battery to power the motor controller.
3. Connect the powered motor controller to a USB port on your computer with Ion Studio already
open.
Firmware Update
Once Ion Studio detects the motor controller it will display the current rmware version in the
Firmware Version eld (1). Each time Ion Studio is started it will check for a new version of its
self which will always include new rmware. If an update is required Ion Studio will download the
latest version and display it in the rmware available eld (2).
1
2
3