Users Manual Part 7

IBA | F-12 | Clinical User’s Guide
Volume 1 - Treatment Session
System Messages
|
adaPT-
deliver
Any Any Unable to generate DICOM treatment
record because of an internal error!
Please check log messages for details.
This message informs the user that the system was
unable to generate a DICOM record and advices
them to investigate the issue by accessing the logs.
The user can record the DCEU values manually in
the OIS. Contact an operator to fix this issue.
adaPT-
deliver
Any Any Unable to write user action log into
database.Please check database
connection!
This message informs the user that there may be a
database connection issue and advices them to
check the status of the connection.
adaPT-
deliver
Any Any The current PPD positions are not in
tolerance.If you want to enter irradiation,
please input valid user name and
password, and your action will be
recorded.
This message informs the user that the positions of
the Patient Positioning Devices are out of tolerance.
It prompts them to sign with their credentials (which
will be recorded) if they wish to enter irradiation
using those PPD positions. The user may also
choose to modify the tolerances from the OIS or
adaPTprescribe (depending on which one is relevant
in the current situation).
adaPT-
deliver
Any Any For further analysis, you are strongly
recommended acquire a heap dump at
this moment! Heap dump can be created
by VisualVM(jvisualvm.exe) which
should be found under <$JDK>/bin
folder. If you don't want this reminding,
please set
trcs.debugMemoryLeak=false
This message reminds the user to create a heap
dump for further analysis using VisualVM. This
reminder can be deactivated by setting the
parameter trcs.debugMemoryLeak to false.
This parameter is set to false by default.
Table F-1. System messages
Software Environment(s) Delivery Message Description