Users Manual Part 7

Clinical User’s Guide IBA | F-9 |
Volume 1 - Treatment Session
System Messages |
adaPT-
deliver
Any Any Some beam(s) are not completely
irradiated. Do you confirm you want to
cancel the session?
This message informs the user that at least one of
the beams in the current session have not been
completely irradiated. The message prompts the
user to confirm if they want to cancel the session
regardless of that fact.
adaPT-
deliver
DevC
Standalone
Any The selected beam has been partially
treated. You must check the 'Delivered
MU [MU]' if you want to proceed to
irradiation with this beam.
This message informs the user that the beam they
have just selected was partially irradiated in the
past, and that they must check the delivered MU
value before proceeding to irradiate the remainder.
adaPT-
deliver
DevC
Standalone
Any Do you confirm to treat a partially
delivered beam?
This message prompts the user to confirm whether
they want to proceed with the irradiation of a
partially delivered beam.
adaPT-
deliver
Any Any Do you want to disconnect from OIS? This message prompts the user to confirm whether
they wish to disconnect adaPTdeliver from the OIS.
adaPT-
deliver
Any Any The irradiation has stopped due to a user
request. This irradiation is not
complete.\n[Treatment Termination
Status={0}]
This message informs the user that the irradiation
was stopped before being complete, due to a user
request. The message also provides the Treatment
termination Status of the irradiation.
adaPT-
deliver
Any Any The irradiation has stopped due to a
system error. This irradiation is not
complete.\n[Treatment Termination
Status={0}]
This message informs the user that the irradiation
was stopped before being complete, due to a
system error. The message also provides the
Treatment termination Status of the irradiation.
Table F-1. System messages
Software Environment(s) Delivery Message Description