Users Manual Part 7

IBA | F-8 | Clinical User’s Guide
Volume 1 - Treatment Session
System Messages
|
adaPT-
deliver
Any Any You specified a previously delivered MU
for this beam. This can only be done in
the context of a previously interrupted
irradiation, and value must be carefully
set and checked. Are you sure you want
to proceed?
This message informs the user that specifying a
previously delivered MU is an action that is not trivial
(the value must be carefully checked) and that is
only pertinent in the case of a partial irradiation. The
message prompts the user to confirm, after this
information, if they want to proceed with a manually
specified previously delivered MU value.
adaPT-
deliver
Physics mode PBS Specifying such value can only be in the
context of a previously interrupted
irradiation, and Required MU must be
carefully set and checked. If you confirm
this, press OK. Or press Cancel, the
value will be reset.
This message informs the user that specifying a
required MU value is an action that is not trivial (the
value must be carefully checked) and that is only
pertinent in the case of a partial irradiation. The
message prompts the user to confirm, after this
information, whether they want to proceed with a
manually specified required MU value or whether
they want to cancel and reset the value. This
message may appear for Eye treatments or in PBS
Physics mode.
adaPT-
deliver
Physics Mode Any You are entering the Physics mode.
Treatment of patients is not allowed in
this mode. Would you like to continue?
This message informs the user that they are logging
into adaPTdeliver in Physics mode and that patient
treatment is not allowed in this mode. The message
prompts the user to acknowledge they will log into
adaPTdeliver in Physics mode.
Table F-1. System messages
Software Environment(s) Delivery Message Description