Users Manual Part 7

IBA | F-6 | Clinical User’s Guide
Volume 1 - Treatment Session
System Messages
|
adaPT-
deliver
DevC
Standalone
Any Warning: modified MU This message confirms to the user that they have
successfully modified the MU value.
adaPT-
deliver
Any PBS Not enough information to resume a
partial PBS beam. Click on [Partial]
button to resume from local database or
to explicitly proceed with inaccurate
data.
This message informs the user that they need to
use the 'Partial' menu. There, they should select the
appropriate treatment record from the local
database for resuming a partial PBS beam, if
available. Selecting the appropriate treatment
record from the database, if available, is more
accurate than resuming using an MUd value only.
adaPT-
deliver
Any Any
The following problems were detected:
Beam [{0}] has already been treated
today.
If you want to confirm this selection,
please enter your credentials.
This message informs the user that the beam they
have selected has already been fully or partially
treated. The message prompts them to sign with
their credentials if, despite being aware of that fact,
they decide to confirm the selection.
adaPT-
deliver
DevC Any For DoseReferenceNumber ({0})/For {0}
reference point, the dose ({0} Gy) goes
over the daily dose ({1} Gy). Do you want
to start treatment anyway?
This message informs the user that for a particular
dose reference point, the dose prescribed exceeds
the daily dose limit. The message prompts them to
confirm, once aware of that fact, whether or not
they want to start the treatment.
Table F-1. System messages
Software Environment(s) Delivery Message Description