Users Manual Part 7

Clinical User’s Guide IBA | D-7|
Volume 1 - Treatment Session
Managing adaPT prescribe Settings |
Figure D-5. Accessories Management Screen
From the Snout Management tab of the A
CCESSORIES MANAGEMENT SCREEN you can
click any of the following buttons:
 New: to create a new accessory. You can define the ID and type of any new
snout. The snout ID that you define here will be available for selection in
adaPTprescribe. The definition is as follows:
 Snout ID: the identification of the snout as known in the treatment plan.
 Snout Type: the identification of the snout as known by the PT system.
 Accessory code: the identification of the snout as encoded by the electronic
circuitry that is encapsulated and attached to the snout. The eID is
communicated to adaPTprescribe via the eIDEU.
Note: It is IBA responsibility to couple the Accessory Code to the new snout
ID. The IBA engineer therefore will read the snout’s electronic identification (eID)
code using an eID reader.
 Edit: to view the definition of the selected accessory.
 Delete: to remove an accessory from the list.
In addition, you can click Info to display the S
NOUT TYPE LEGEND. This SNOUT TYPE
LEGEND lists all snout types that exist.
Note: Not all snouts types listed in the SNOUT T YPE LEGEND may be present at your
center.