Users Manual Part 6
IBA | 47-2 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part XI
- Patient Positioning and Alignment Calculating Corrections Using adaPT
insight
|
Preliminary adaPT
insight
Activities
In the Treatment Planning Room (TPR) the DICOM CT series, the DICOM RT Plan
data, and the DICOM RT Structure Set data of the patient are compiled. All this data
serves as the input for the Digitally Reconstructed Radiographs (DRRs) that are
generated by adaPTinsight prior to computing the correction.
The adaPTinsight
monitor, keyboard, and mouse are in the shielded area of the TR.
These devices are connected to the adaPTinsight workstation, which is located in the
TCR, and serve to acquire the Digital Radiographs (DRs) at the time of treatment.
Note: Both before and during treatment, a number of DRs and DRRs are taken of
the patient. Most of these images are stored on disk in electronic format. Disk
storage capacity, understandably, has size limitations. Therefore, specific archiving
procedures may have been put in place at your PT center.
Starting up adaPT
insight
In order to use adaPTinsight you must start up the computer workstation in the TCR
on which it is installed. Proceed as follows:
1. If the station is not started yet, press the Start button.
2. Select «therapist» in the list of users on Windows login screen and press enter
(without password). Windows will then start and adaPTinsight will be
automatically launched.
3. The ADAPTINSIGHT LOGIN SCREEN appears.
Figure 47-1. AdaPTinsight Login
Logging Into adaPT
insight
Upon startup of adaPTinsight the ADAPTINSIGHT LOGIN SCREEN appears.
Enter your user name and password; both are case sensitive.