Users Manual Part 6
IBA | 44-2 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part X
- Preparing for Treatment Beam Scheduling Principles
|
When the Accelerator Operator allocates the beam, the RTT in the relevant TR is
informed that beam is allocated to the corresponding TR. The subsequent beam
tuning can then be performed automatically or manually.
Switching ABS Modes
Switching between the Manual or Automatic ABS mode is performed by the
Accelerator Operator in the MCR. This can be done unless beam is allocated.
Both in Manual and Automatic ABS mode the beam request queue is visible in each
TCR, TR, and in the MCR.