Users Manual Part 6

Clinical User’s Guide
IBA | B-1 |
Volume 1 - Treatment Session
Appendix B
• • • • • •
Using the Dosimetry Manager
The Dosimetry Manager enables users to:
manually enter temperature and pressure measurements into the system: This
data is used to correct the dose output factor.
manually enter the k
IC
(Dose Correction Factor): This data is used to finely adjust
system behavior to absolute calibration measurements. The Dose Correction
Factor is defined based on the morning QA.
manually enter the tolerance (in %) on the drift of the k
TP
(Temperature and
Pressure Correction Factor, TPCF) between two subsequent beams.