Users Manual Part 5

IBA | 41-22 | Clinical User’s Guide
Volume 1 - Treatment Session
|Part VII - Using ada PT deliver in Worklist Mode Resuming after a Partial Irradiation |
4. Select the corresponding plan and beam in the OIS. (The data is sent by the OIS
to adaPTdeliver.)
5. The Beam Selection screen appears directly with the chosen beam selected.
In the Beam Selection screen (Figure 41-20), the beams marked as partial are
indicated by an orange checkmark .
Figure 41-20. Resuming irradiation after partial treatment
Note: In case of resuming from the irradiation records containing simulated values,
a signature will be needed to proceed. The user will receive a message (Figure 41-
21) to confirm the use of simulated data. The message shows which layer contains
the simulated data, and the uncertainty of the MUs.