Users Manual Part 5

Clinical User’s Guide
IBA | 41-21|
Volume 1 - Treatment Session
|Part VII
- Using
ada
PT
deliver
in Worklist Mode Resuming after a Partial Irradiation
|
Resuming irradiation
Ensure the partial beam is selected as indicated above. Click Next to proceed to the
P
REPARATION SCREEN and complete the irradiation of the selected beam.
Note: In case of resuming from the irradiation records containing simulated values,
a signature will be needed to proceed (Figure 41-19).
Figure 41-19. Confirmation to the use of simulated data for resuming irradiation
Resuming Irradiation in a New Session
The user needs to resume the irradiation in a new session when there is:
Termination by the PTS where the adaPTdeliver session crashes, or
Closing of the adaPTdeliver session by the Therapist
Note: Resuming the irradiation in a new session is possible in both the Standalone
and the OIS mode.
Using an OIS
DEV-Centric mode
1. In the OIS, create a continuation fraction.
2. Then create an Appointment and proceed to Check-in the patient.
3. Click on the corresponding line in adaPTdeliver to select it, and then click Next
(Figure 40-1).