Users Manual Part 5

IBA | 36-8 |
Clinical User’s Guide
Volume 1 - Treatment Session
|Part VI
- Using adaPT
deliver
in Standalone Mode Monitoring and Controlling the Treatment
|
Viewing Operator Logs
This tab lists the reason(s) why irradiation got paused, if any, in addition to some
miscellaneous errors.
Figure 36-6. Monitor Panel - Operator Logs
Monitoring System Start/Resume Conditions
The SYSTEM START/RESUME TAB displays high level information about the startup and
resume conditions.
Figure 36-7. System Start/Resume Tab
Pencil Beam Scanning
Monitoring Beam Line Checks
The BEAM LINE CHECKS TAB enables you to monitor the checks that are performed on
the status of beam line elements such as beam stops, Beam Profile Monitors, the
degrader, magnets, slits, etc. You can visually monitor the status of the check. For
instance, the Beam Stop In condition is activated only during a Pause, whereas the
Beam Stop Out condition is activated only during Irradiation.
red Check active but not OK
yellow Check active and not OK, but overridable
Table 36-1. Monitor Panel Icons and Colors Legend (Cont’d)
Icon Color Meaning